Gadgets

Best 3D Pen in Fall 2017 – Buyers Guide to 3D Printing Pens For KIDS, Artists, Hobbyists

Best 3D Pen in Fall 2016 – Buyers Guide to 3D Printing Pens For KIDS, Artists, Hobbyists

In Fall 2017, there are more than 60 3D printing pens on the market. Read our guide to find the best 3D pen for kids, hobbyists, and artists.

3D printing pens are fun, whether you’re a kid, a hobbyist or an artist — they can enhance your creativity and help you get a better understanding of three-dimensional objects.

Currently, 3D printing pens are made with two different technologies. FDM, short for “Fused Deposition Modeling”, is the same process used by many desktop 3D printers. Molten plastic comes out of their heated nozzle. Most models listed in this article use this process.

There are a few, however, that use a less common process. A special ink called “photopolymer” solidifies when exposed to UV light. The liquid ink is extruded through a nozzle, where it is then cured by LED nodes attached to the tip. This process is especially safe for children, as the nozzle stays cold.

If you take a quick glance at 3D pens on Amazon alone, you will realize there are at least 60 different 3D printing pens out there. And more can be found elsewhere, like the 3Doodler PRO. But a closer look reveals that most of them are actually clones of another 3D pen, but with different branding and prices.

Of course, there are a few premium products that are easily discernible from the rest — and they cost a little more.

Now, which is the best 3D pen for you? It depends on what you want to do. There are pens for kids, for hobbyists and for artists. Take a look and compare the features:

Note: If you find a new 3D pen that isn’t on our list, please let us know in the comments.

Best 3D Pen 2016 – Buyer’s Guide: Overview

You can sort and search through all columns of this table. Or you can skip this table and jump directly to the detailed descriptions of the 3D printing pens.

Best 3D Pen for Kids

These are the best 3D printing pens for children because their nozzle isn’t hot to the touch. However, for some of these models, parental guidance for young children is advised. We’ve noted this in the description of every model.

Best 3D Pen for Kids #1: Tech 4 Kids 3D Magic Imagi Pen ($20)

tech-4-kids-3d-magic-imagi-pen-1024x1024

The Tech 4 Kids 3D Magic Imagi Pen is especially targeted towards kids. It is safe to use because it does not use a hot nozzle and thermoplastics to print. Instead, the 3D pen uses liquid polymers, often marketed as “Cool Ink”, that hardens over time when exposed to light. However, the hardening process can be accelerated through the use of UV light, allowing the user to print vertically into the air.

The LED nodes are pointed at the end of the nozzle, so the material is exposed to the UV light. This kind of technology comes with another advantage. That is, the LED lights can be powered for a long time with the use of 3 AAA batteries, unlike a heated nozzle which needs a power adapter for longer use. This also makes the device truly portable. Batteries are not included.

Features:

  • For Kids (parental guidance advised).
  • Affordable price
  • Photopolymer technology (Cool ink solidified by UV light)
  • Cordless
  • 3 AAA Batteries (lasts for four hours, not included)
  • Market price: $20

Check Price of Tech 4 Kids Magic Imagi Pen at Amazon:Tech 4 Kids 3D Magic Imagi Pen available at Amazon

Best 3D Pen for Kids #2: AtmosFlare 3D Drawing Pen ($30)

AtmoFlare 3D Pen

The AtmosFlare 3D pen uses cool ink technology. The material is solidified by UV light; the tool has no automated extrusion capabilities. The user must squeeze the ink cartridge in order to extrude the material.

The package comes with four different nozzles, one AA battery that lasts for four hours, two refillable ink cartridges and the 3D pen itself. Although the battery is not rechargeable, it’s great for anyone who is thinking about giving this new way of creating art a shot.

The manufacturer advises that due to the nature of its functionality, reflective or white printing bases should be avoided. Since UV light solidifies the 3D printing ink, any reflected light may cause the ink to clog the nozzle. Also, the UV light emitted at the tip can be harmful to the eyes. Therefore, parental guidance for young children is advised.

Features:

  • For kids (Parental guidance advised)
  • Affordable price
  • Photopolymer technology (Cool ink solidified by UV light)
  • Cordless
  • AA batteries (lasts for four hours)
  • Market price: $30

Check price of AtmosFlare 3D pen at Amazon:AtmosFlare 3D Drawing Pen available at Amazon

Best 3D Pen for Artists #3: 3Doodler Start ($50)

3doodler-start

3Doodler has added a 3D printing pen for kids to their expanding range of products. The 3Doodler Start, which is targeted towards kids as of the age of 8 is very affordable at just $50. But most importantly, the 3Doodler has developed a special biodegradable plastic filament, which melts at a much lower temperature than PLA or ABS. This allows the molten material to be formed and touched by your hand without being to hot. This also means that the nozzle is safe to touch as well.

3Doodler have put an emphasis on usability and simplicity with this 3D printing pen. There is only one extrusion speed as well as one nozzle temperature. The only features are a micro USB port for charging and plugged-in operation; an LED indicator showing the user that the pen is charging, heated up or ready to use; an on/off switch; and finally the single button used to operate the extruder. One click turns it on or off and a double click reverses the extruder.

If you find you’re lacking creativity one day, you can visit 3Doodler’s website where they offer free access to over 200 fun stencil projects. Use this service for inspiration or to get just get started with your 3D printing pen. Also, the 3Doodler Start is available for purchase in bundles for educational use.

Features:

  • Portable
  • Easy to use
  • Suitable for children (warm nozzle, not hot)
  • FDM technology (special low temperature biodegradable filament)
  • Extrude on/off and reverse button (all in one)
  • On/Off switch
  • LED indicator
  • One temperature
  • Operate plugged in or wirelessly with charged battery
  • 1 minute to heat up
  • Market price: $50

Check Price of 3Doodler Start at Amazon:3Doodler Start available at Amazon

Best 3D Pen for Kids #4: CreoPop 3D Pen ($85)

CreoPop 3D Pen

The CreoPop is not exactly the cheapest 3D pen at Amazon – but it is safe for children. With just one operation button, it’s easy to use. It solidifies liquid photopolymers (cool ink) with LED light, so it doesn’t have a heated nozzle.

The light is directed at the tip of the 3D pen where the cool printing ink is extruded. All sorts of proprietary inks are available, ranging from magnetic to glow-in-the-dark to elastic and much more. Each ink cartridge contains enough material for about 45ft of 3D drawing. The use of photopolymers instead of thermoplastics allows the 3D pen to operate on battery power alone, making the entire unit portable and cordless. However, materials like PLA and ABS are not printable with this unit.

Features:

  • Very easy to use (one operation button)
  • Safe for children (no heated nozzle)
  • Valuable appearance
  • Cordless
  • Rechargeable battery (via USB cable)
  • Photopolymer technology: cool ink comes in many colors and variations (glow-in-the-dark, conductive material, etc.)
  • Market price: $85

Check price of CreoPop 3D Pen at Amazon:CreoPop 3D Pen available at Amazon

Best 3D Pen for Kids #5: Polyes Q1 3D Pen ($100)

Polyes Q1

The Polyes Q1 3D pen uses LED light at the tip of the 3D pen to solidify a special photopolymer, also known as “cool ink”. Once slanted past a certain angle, the 3D pen will automatically shut off the LED light to avoid eye damage, as long as the child-safety switch is turned on.

The ink’s chemical structure causes it to react when exposed to certain kinds of light, often in the UV or visible light spectrum. This characteristic offers another level of safety by eliminating the need of a heated nozzle. In addition, the 3D pen does not emit any toxic or irritating fumes. As a result of these features, the Polyes Q1 is child-friendly. On the other hand, it will not be possible to print with traditional 3D printing materials like PLA and ABS.

Features:

  • Safe for children (no heated nozzle)
  • Easy to use
  • Child-safety switch
  • Cordless
  • Rechargeable battery (via USB cable)
  • Photopolymer technology: cool ink comes in many colors and variations (glow-in-the-dark, aromatic, etc.)
  • Speed control button
  • Market price: $100

Check Price of Polyes Q1 3D Pen at Amazon:Polyes Q1 available at Amazon

Best 3D Pen for Hobbyists

These models are very easy to handle because they have fewer options and controls. This makes them the best 3D printing pens for hobbyists.

Best 3D Pen for Hobbyists #1: Manve Intelligent 3D Pen & Clones (From $20)

Manve 3D Pen

The Manve Intelligent 3D pen is almost identical in design to the 7Tech 3D pen. The only thing that separates these two 3D printing pens is the Manve’s lack of an LCD screen. Two separate buttons on the 3D pen extrude and unload the filament and a slider on the other side of the 3D pen offers the artist the possibility to alter the speed of extrusion. This way, the user is more in control of their project. Two LED lights also indicate whether the 3D pen is plugged in or not and if the device is active or not. The 3D pen also features a safety feature, that puts the device into standby mode after 5 minutes of inactivity.

Features:

  • Very quiet
  • Easy to use
  • Not suitable for children (hot nozzle)
  • FDM technology (PLA and ABS filament)
  • Speed control slider
  • Extrude and reverse buttons
  • LED lights indicating whether or not the 3D pen is powered or in use
  • Auto standby mode after 5 minutes
  • Market price of Manve Intelligent 3D Pen and its clones: $20 – $53

Check Price of Manve Intelligent 3D Pen and Clones at Amazon:Manve Intelligent 3D Pen available at Amazon

Best 3D Pen for Hobbyists #2: Future Former 3D Printer Pen & Clones (From $40)

Future Former 3D Printer Pen

The Future Former 3D Printer Pen is reduced to the essentials. It is available in different colors. The 3D pen has an extrusion button as well as a power button which simultaneously acts as an unload button when pressed and held. The user has the ability to select between PLA or ABS filament. Apart from the basic functions, the 3D pen goes into standby mode after 5 to 10 minutes of inactivity. All these functions along with ergonomic design will truly keep artists focused on their creations.

Features:

  • Suited for beginners
  • Reduced to the bare essentials
  • Ergonomic design
  • Easy to use
  • Not suitable for children (hot nozzle)
  • 100% money back guarantee
  • FDM technology (PLA and ABS Filament)
  • Speed control buttons
  • Filament type switch
  • Power button
  • Extrusion start/stop button
  • Market price Future Former and clones: $40 – $60

Check Price of Future Former 3D Printer Pen and Clones at Amazon:Future Former 3D Printer Pen available at Amazon

Best 3D Pen for Hobbyists #3: Da Vinci 3D Pen ($50)

XYZprinting Da Vinci 3D pen

XYZprinting is best known for their affordable desktop 3D printers. They also recently released a portable 3D printing device called the “Da Vinci 3D pen”. Featuring just two buttons for feeding and unloading filament, and a small LED light indicating the 3D pen is plugged in, the device is very basic in construction and is advertised as only being able to print PLA filament. The company offers 11 proprietary filament colors, however, the 3D pen should be able to handle any PLA filament of the correct gauge. At just under $50, the 3D pen is reasonably priced.

Features:

  • Lightweight
  • Easy to use
  • Not suitable for children (hot nozzle)
  • FDM technology (PLA filament)
  • 11 colors of proprietary filament
  • Power cable (no batteries)
  • LED light
  • Feed and unload buttons
  • Market price: $50

Check Price of Da Vinci 3D Pen at Amazon:Da Vinci 3D Pen available at Amazon

Best 3D Pen for Hobbyists #4: Lay3r 3D Drawing Pen ($52)

Lay3r 3D pen

The Lay3r 3D Drawing Pen is a very basic. It has an auto shutoff safety feature along with two buttons. One button is for unloading the filament and the other is to feed the filament – that’s it. The 3D pen comes with a power adapter and some ABS filament. To prevent potential overheating problems, the 3D pen features a cooling fan.

Aside from that, the 3D pen comes with a power adapter and some ABS filament. To prevent potential overheating problems, the 3D pen features a cooling fan.

Features:

  • Affordable price
  • Reduced to the essentials
  • Easy to use
  • Not suitable for children (hot nozzle)
  • FDM technology (PLA and ABS Filament)
  • Extrusion button
  • Unload button
  • Cooling fan
  • Market price: $52

Check Price of Lay3r 3D Pen at Amazon:Lay3r 3D Drawing Pen available at Amazon

Leave a Reply

Your email address will not be published. Required fields are marked *